Specifications

Cutterbar

Knife speed 490 cycles/min
Cutterbar tilt Base: hydraulic, maximum tilt 9 degree (angle)
Type Straight-line knife drive system
Length 12.3 m
40.5 ft
Knife drive Base: dual knife

Dimensions

Transport width, field position 12.95 m
42.5 ft
Transport width on wheel, less dividers 2.7 m
8.9 ft
Transport length, hitch extended 15.4 m
50.4 ft
Overall operating depth 2.5 m
8.2 ft
Platform length 13.1 m
42.9 ft

Draper belts

Cleat height Cleats: 25.4 mm
1 in.
Speed control Hydraulic from cab
Operating speed Side belts: variable up to 223 m/min
735 fpm
Center belts: 212 m/min
695 fpm
Center belt not included with SPW configuration
Width Side belts: 1.02 m
3.33 ft
Center belts: 1.4 m
4.583 ft
Center belt not included with SPW configuration
Center belt reverse Base: center belt not included with SPW configuration

Feed drum

Number of fingers 18
Center cleanout door Base
Auger finger platform Dual chevron, retracting
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Operating speed 196 rpm
Diameter Two factory-installed options: 356 or 406 mm
14 or 16 in.
Feed drum not included with SPW configuration
Finger reach 152 mm
6 in.
Drum/auger reverse Base

Header height sensing

Type Base: electrohydraulic
Header height sensing on the ground Base
Header height sensing off the ground Base

Key Specs

Draper belts speed control Hydraulic from cab
Knife speed 490 cycles/min
Pickup reel operating speeds 6-54 rpm
Knife drive Base: dual knife
Cutterbar length 12.3 m
40.5 ft

Pickup reel

Fingers Nylon
Height control Hydraulic
Speed control Hydraulic
Reel fore and aft Cylinder stroke: 359 mm
14.1 in.
Total range: 620 mm
24.4 in.
Diameter 1.067 m
3.5 ft
Reel reverse Base
Number of slats Six bat poly base
Reel resume Base
Reel lift Cylinder stroke: 330 mm
13 in.
Total range: 391.5 mm
15.4 in.
Operating speeds 6-54 rpm

Platform

Type Rigid draper

Top auger

Type Optional: hydraulic drive