NOTE: 18x8.5N10 Tweel turf tires are available as an ordering option for QuikTrak 648R, 652R, 652R EFI, 661R, and 661R EFI Mowers. Tweels for QuikTrak Mowers are not available as base code equipment.
John Deere leads the commercial zero-turn mower industry with use of the Michelin X Tweel Turf technology for the QuikTrak Mowers.
Michelin is a world leader in tire manufacturing and technology. This airless radial tire solution is an industry first for John Deere, which provides an additional advantage to John Deere operators.
Advantages of the Michelin X Tweel Turf include:
Mowing performance is improved.
Unique energy transfer within the poly-resin spokes reduces the bounce associated with pneumatic tires.
Excellent curb climbing due to the Michelin X Tweel Turf construction and flexibility.
More consistent cut quality because inconsistent tire pressure is eliminated.
Uptime is improved.
The exclusive technology eliminates downtime and associated cost due to flat or damaged tires.
Punctures and sidewall damage no longer result in downtime.
Cost of operation is reduced.
Cost of repairs and maintenance is reduced. One single unit replaces the current tire, wheel, and valve assembly. There is no need for complex tire-mounting equipment.
No need to spend time checking and optimizing tire pressure.
The need to purchase and stock plug kits and spare tires is eliminated, particularly for professional landscape contractors and government agencies who normally stock them.
The tire tread will last up to three times longer than current pneumatic tires because automotive-grade rubber is used for the tread.
Michelin X Tweel Turf
Michelin X Tweel Turf
Heavy-duty construction provides the ultimate in performance and reliable operation:
High-strength, poly-resin spokes carry the load.
Four-hole, heavy-duty steel hub easily bolts onto any R Series QuikTrak Mower.
Zero degree, high-tensile, proprietary carcass provides great lateral stiffness while resisting damage from impact and penetration.
Michelin, X, and Tweel are trademarks of Michelin North America, Inc.
John Deere provides application-specific Environmental Protection Agency (EPA) approved field-installed propane conversion kits for specific John Deere Commercial Walk-Behind Mowers, QuikTrak Mowers, and ZTrak Mowers. The conversion kits include all components required to convert the engines to operate on propane fuel. Single-tank or dual-tank brackets (depending on the vehicle) are provided for securely holding the propane tank(s) to the vehicle.
Propane tanks are not included.
An optional altitude kit is required when operating at altitudes above 2000 ft (610 m). The operator’s manual with the propane conversion kit provides further details. Parts must be ordered separately through John Deere Parts.
Propane facts:
Propane is flammable and commonly used as a fuel.
The molecular formula of propane is C3H8, and it is in the family of liquefied petroleum gases (LP gases). The other LP gases include butane, propylene, butadiene, butylene, isobutylene, and mixtures thereof.
Propane is commonly available and has proven to be a dependable, safe, economical, and clean-burning fuel. It can be used as household fuel, industrial fuel, and fuel for internal combustion engines. Propane has been used as a fuel since 1910.
At atmospheric pressure, propane boils at -44°F (-42.2°C), meaning it typically exists as a vapor. However, when contained under pressure, such as in a propane cylinder, it can exist as a liquid.
Propane is naturally odorless, but includes an additive odorant, usually mercaptan, which gives it a distinct odor.
Vapor propane is heavier than air, meaning it will settle in low areas such as along the ground or in drains.
Advantages of John Deere propane conversion kits include:
Reduced fuel costs, up to 30 percent depending on fuel prices
NOTE: Conversion to propane is not intended for units with engines having more than 250 hours of use.
Commercial Walk-Behind Mowers (model year 2018 and prior)
WG Series
WH Series
WHP Series
Model
WG32A
WG36A
WG48A
WH36A
WH48A
WH52A
WH61A
WHP36A
WHP48A
WHP52A
WHP61A
Engine model
FS481V
FS481V
FS481V
FS481V
FS600V
FS600V
FS691V
FS481V
FS600V
FS600V
FS691V
Engine displacement
603 cc
603 cc
603 cc
603 cc
603 cc
603 cc
726 cc
603 cc
603 cc
603 cc
726 cc
Propane kit model number
Not available
Not available
Not available
FS603cc
FS603cc
FS603cc
FS726cc
FS603cc
FS603cc
FS603cc
FS726cc
QuikTrak Mowers
E Series
M Series
R Series
Model
652E
636M
648M
652M
648R
652R
652R EFI
661R
661R EFI
Engine model
FX691V
FS600V
FX691V
FX691V
FX691V
FX730V
ECV740 EFI
FX730V
ECV740 EFI
Engine displacement
726 cc
603 cc
726 cc
726 cc
726 cc
726 cc
747 cc
726 cc
747 cc
Propane kit model number
FX726cc
Not available
Not available
Not available
FX726cc
FX726cc
Not available
FX726cc
Not available
Commercial ZTrak Mowers
E Series
M Series
R Series
Model
Z915E
Z920M
Z930M
Z945M EFI
Z950M
Z955M EFI
Z960M
Z930R
Z950R
Z955R EFI
Z970R
Engine model
CV742
FX730V
FX801V
ECV850 EFI
FX850V
ECV860J EFI
FX921V
FX801V
FX850V
ECV860J EFI
FX1000V
Engine displacement
747 cc
726 cc
852 cc
824 cc
852 cc
824 cc
999 cc
852 cc
852 cc
824 cc
999 cc
Propane kit model number
Not available
FX726cc*
FX852cc*
Not available
FX852cc*
Not available
Not available
FX852cc*
FX852cc*
Not available
Not available
*Not compatible with 48-in. (122-cm) mower decks.
Worthington tanks are manufactured by Worthington Industries, Inc.
Blades
Number
Three
Blade tip speed
18,900 fpm 5,761 m/min
Brakes
Dynamic braking
Dual hand-controlled levers
Park brake
Tire engagement
Park brake actuation
Hand lever
Buyer's note
Warranty
24 months
Dimensions
Weight
910 lb 412.8 kg
Length
66 in. 167.6 cm
Width
Deflector down, 62 in. 157.4 cm
Height
47 in. 119 cm
Drivetrain
Speed and direction control
Twin hand-controlled levers
Filter
Spin-on replaceable
Transmission
Hydrostatic
Travel speed
Forward 0-9.6 mph 0-15.4 km/h Reverse 0-5.5 mph 0-8.9 km/h
Hydraulic capacity
With filter-wet, 2.9 qt 2.7 L Dry, 5 qt 4.7 L
Wheel motors
Hydro-Gear, 15 cu in. 246 cc
Hydraulic pumps
Hydro-Gear with fans, 0.73 cu in. 12 cc
Electrical system
Charge system
At 3,600 rpm, 20 amp
Battery voltage
12 V
Hour meter
Digital
Operator presence starting system
Yes
Engine
Cylinders
Two, V-twin
Oil filter
Full flow, replaceable
Lubrication
Full pressure
Cooling
Forced air
Power
Gross at 3,600 rpm: 22 hp 16.4 kW
Air cleaner
Heavy-duty canister type with safety element
Manufacturer/Model
FX691V
Displacement
44.3 cu in. 726 cc
Crankcase capacity
With filter, 2.2 U.S. qt 2.1 L
Fuel system
Fuel type
Gasoline
Fuel tank switch/shut-off valve
Yes
Fuel tank capacity
5.6 U.S. gal. 21.2 L
Key Specs
Drive wheels
20x10-8 Turf Master
Blade tip speed
18,900 fpm 5,761 m/min
Engine Power
Gross at 3,600 rpm: 22 hp 16.4 kW
Speed range
0-9.6 mph 0-15.4 km/h
Fuel tank capacity
5.6 U.S. gal. 21.2 L
Caster wheels
13x6.5-6
Warranty
24 months
Engine Manufacturer/model
FX691V
Mower deck Size
48 in. 122 cm
Transmission
Hydrostatic
Mower decks
Deck construction
Fabricated steel, floating mount system
Discharge
Side
Size
48 in. 122 cm
Height-of-cut range
Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm
Cutting width
48 in. 122 cm
Deck thickness
7 gauge 0.18 in. 4.6 mm
PTO
Type
Electro-Magnetic with brake, 200 lb-ft 271 Nm
Drive
Dual B-section V-belt with Kevlar® cord
Tires
Load rating
4 PR
Drive wheels
20x10-8 Turf Master
Wheels
Caster wheel type
No-flat semi-pneumatic with sealed bearings
Caster wheels
13x6.5-6
Additional information
Date collected
20-June-2019
4.0
2 Reviews
5.0
4.0
4.0
Apr 28, 2020
Great cut Difficult blade change
3/5
I bought a new John Deere 648r stander without seeing it in person. The blade changes are horrible to do. We use a front wheel lift and can not change the middle blade with just one person. The muffler is in the way anyway so forget doing it at the end of the day. They use bolts and nuts on the spindle when they should be using another type of spindle that you screw a bolt in with an air gun.
We change the blades every day and I am looking for ideas that someone has done. I Am considering changing the middle spindle. Also, how many washers and spacers do they expect you to use ? There are like 5 or 6 different ones for each blade. If anyone is or knows someone in the landscape division of John Deere please put them in touch. I have some simple ideas that someone in the company should have thought of and implemented
BoB123
From: CaPe cod
Usage Frequency: Daily
Level of Experience: Expert
5
3
3
Apr 03, 2020
Get one!
5/5
If you don't have on these, get one now! I have a 60' kubota zero turn that just sits most of the time. Why..Because I bought a stand on 648r. This is the one!
Fill out this form to request a quote. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Request Service
Fill out our request form to contact us about service.
Thank you for submitting.
Request Parts
Fill out our request form to contact us about parts.
Thank you for submitting.
Request Used Parts
Fill out our request form to contact us about used parts.
Thank you for submitting.
Request Rental
Fill out our request form to contact us about rentals.
Thank you for submitting.
Contact us about Precision Ag
Fill out our request form to contact us about precision ag technology.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Learn More About Our Service Programs
Thank you for submitting.
Send us your feedback
We'd love to hear your feedback! Please fill out the form below to share.
Thank you for submitting.
Body Shop
Fill out this form to get in contact with our body shop. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Papé Technician Training Program Interest Application
Thank you for submitting.
Technician Application
Thank you for submitting.
Events, Donations and Sponsorships
Thank you for submitting.
Join The Papé Team
Fill out our career form and a representative will be back in touch with you soon.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for coming in, you are important to us! Please fill in your information below and one of our members will help you as soon as we can.
Thank you for submitting.
Thank you for your interest in electrification, you are important to us! Please fill in your information below and one of our members will reach out to you as soon as we can.
Thank you for submitting.
Giveaway Submission
Thank you for submitting.
Vaccination Status Survey
Thank you for submitting.
General Newsletter
Thank you for submitting.
Hawaii Newsletter
Thank you for submitting.
Request Dealer Transfer
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for your interest in upgrading to a premium John Deere compact utility tractor. Please fill in your information below and a Papé Machinery member will contact you shortly.