DH54 Series Offset Disks
- John Deere
- Agriculture
Find Your Nearest Location
Key Features & Specs
- Working widths range from 10-ft. to 14-ft.
- Adjustable disk blade scrapers
- Oil bath tapered roller bearings minimize maintenance
- PTO HP 175 – 225 hp (130.5 – 167.8 kW)
- Working Width 10 ft. (3.0 m)
- Hitch Cast link
- + Expand All
- - Close All
-
Oil bath tapered roller bearings minimize maintenance
Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.
-
Adjustable disk blade scrapers increase productivity
Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.
-
Two separate control arms create consistent performance
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.
-
End washers and wrenches keep gang shaft end nut tight
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
-
Transport locks secure disk wings
Transport locks are standard, ensuring disk wings are in secure transport mode.
Available blade sizes
Blade option two | 813x12.7 mm 32x0.5 in. |
Blade option one | 762x12.7 mm 30x0.5 in. |
Disk blades
Spacing | 33 cm 13 in. |
Quantity | 26 |
Type | Notched (front) Notched (rear) Standard |
Disk gangs
Rear angle | 3 positions |
Axle size | 6.4 cm 2.5 in. |
Scrapers | Adjustable |
Axle material | Round heat treated alloy steel threaded on both ends |
Bearing standards | Welded, Reinforced |
Bearing wear plates | Standard |
Bearing type | Oil bath tapered roller |
Front angle | 3 positions |
Frame
Duty | Heavy |
Tube size | 17.8x17.8x0.95 cm 7x7x0.375 in. |
Type | Single offset rigid |
Hitch
Front hitch type | Pintle |
Lighting and safety
Safety tow chain | Yes |
Markings | SMV |
Lights | Yes |
Set-up time
Labor hours | 2-3 for two people |
Tires
Type | 2 - Radial industrial |
Size | 385/65R22.5 |
Wheel hub type | 5-Spoke dayton hubs |
Tractor requirements
Recommended drawbar hp range | 223.7 kW 300+ hp |
Transport
Wheel hub bearings | Dual tapered roller bearings |
Width | 4.6 m 15 ft |
Warranty
Time period | 1 year |
Weight
Weight per disk blade | 228.2 kg 503 lb |
Net | 5942.1 kg 13100 lb |
Working
Approximate working width | 4.3 m 14 ft |