- 755 hp Cummins® QSK 19.0L engine
- All-new design delivers improved serviceability with an integrated KP hoist, easy header hook-up and ground level fuel fill
- A best-in-class cab offers easier to use controls, better display access and visibility
Specifications
Blower/Crop accelerator
Number of blades | 10 |
Speed (option) | 1800 rpm |
Rotor diameter/housing width | Rotor diameter: 560 mm 22 in. Housing width: 619.8 mm 24.4 in. |
Cab
Tilt and extend steering column | Standard |
Operator's seat | Air-suspension seat optional |
Electric adjust and heated | Optional on rear view mirrors |
Air conditioning and heater | Standard - ClimaTrak |
Side window wiper | Rear and side window wiper optional Parallel-type windscreen wiper |
Trainee seat | Standard |
Cool box | Optional |
Rear view mirrors | Standard |
CAN-BUS electronics | Standard |
Hectare counter | Standard |
Operator information system | Cornerpost display |
Cooling system
Cooling system capacity | 130 L 34.34 U.S. gal. |
Cooling fan drive | Direct |
Crop-harvesting units
Grass pick-ups (transport width) | 3.0, 4.0, 4.5 m 9.8, 13.1, 14.8 ft |
Header height control | Advanced header control (AHC) optional |
Cutterhead
Knife types available (crop) | Straight - grass Curved - corn |
Shear bar, reversible | Standard |
Cutterhead housing width | 856 mm 33.7 in. |
Speed at rated engine speed | Standard - 1100 rpm Optional - 1200 rpm |
Knife drum diameter | 670 mm 26.3 in. |
Knife drum width | 850 mm 33.5 in. |
Number of knives | 40 or 48 |
Disk type (kernel processor)
Diameter of disks | 240 mm 9.45 in. |
Weight | 190.5 kg 420 kg |
Number of disks (top/bottom) | 17/16 plus 2-1/2 |
Driveline
Ground drive | Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake system Engine rpm on road: 1400-2100 rpm |
Main driveband, polybelt belts | Eight belts |
Crop flow components | Low-friction crop-flow concept |
Belt tensioning | Active, hydraulic pressure |
Hydraulics | Load sensing |
Number of discs | One disc |
Main driveband | Reinforced with Kevlar inserts |
Crop harvesting unit | Harvest channel wide |
Main clutch | Dry clutch |
Electrical system/Electrical and hydraulic system
Type/voltage | 12 / 24 V |
Hydraulic system capacity | 50 L 13.2 U.S. gal. |
Alternator | 200 amp |
Batteries/battery quantity/capacity | 3 x 174 amp-hr |
Engine
Displacement | 19 L 1159.4 cu in. |
Fuel system | Unit injectors plus four valves |
Speed on road | 1400-2100 rpm |
Engine/ground speed management | Optional |
Model | Europe: Cummins QSK 19755 North America: Cummins QSK 19755 |
Type | Cummins QSK 19.0L Exhaust emission regulation compliancy - Tier 2 |
Cylinders | In line six |
Engine power
Maximum power at 1800 rpm | 563 kW 766 PS / 755 hp |
Fuel tank capacity | 1500 L 396.3 U.S. gal. |
Feeding system/Feedrolls
Number | Four |
Width, front | 830 mm 32.7 in. |
Standard feed roll drive | Hydro feedroll drive IVLOC standard Infinitely header drive speed standard |
Feed roll frame opening | Swing away, 37-45 degree (angle) |
Metal detector | Standard Stone detector is optional |
Ground drive
Engine rpm - Management | Optional |
Rear axle type | Hydro-mechanical 4WD |
Differential lock | Manual or automatic ProDrive |
Automatic wet brake system | Standard |
Maximum transport speed | Hydrostatic transmission: 30 km/h 18.6 mph ProDrive transmission: 40 km/h 24.9 mph |
Kernel processor
Quick-change | Quick kernel processor - swing in/swing out |
Type | Serrated roller |
Key Specs
Fuel system | Unit injectors plus four valves |
Engine | Type Cummins QSK 19.0L Exhaust emission regulation compliancy - Tier 2 Displacement 19 L 1159.4 cu in. Model Europe: Cummins QSK 19755 North America: Cummins QSK 19755 Cylinders Inline 6 |
Maximum power at 1800 rpm | 563 kW 766 PS / 755 hp |
Fuel tank capacity | 1,500 L 396.3 U.S. gal. |
Knife sharpening system
Reverse drive | Standard |
Automatic from cab | Yes, remote from cab |
Reverse rotation | Yes |
Length of cut
Range | 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps 48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps |
Machine management solutions
Satellite (GPS) assisted steering | AutoTrac™ optional |
Yield monitoring | Harvest Monitor™ optional |
Length-of-cut control based on crop parameter | Infinitely variable length-of-cut (IVLOC™) standard |
Crop analysis | HarvestLab™ optional |
Documentation | Harvest Doc™ optional |
Maintenance
Automatic lubrication system | AutoLube optional |
Engine oil and filter change duration | JD+50™ II oil: 350 hours Other oil: 250 hours |
Rotary radiator screen cleaner | Standard |
Propelling drive
Standard | Prodrive autoshift transmission |
Serrated roller (kernel processor)
Maize, roll teeth number (speed differential) | 118 - 24 or 32 percent |
Sorghum, roll teeth number (speed differential) | 238 - 32 percent |
Wholecrop, roll teeth number (speed differential) | 178 - 32 percent |
Weight | 163.3 kg 360 lb |
Spout
Double-cap deflection | Standard |
Hydraulic height position | Hydraulic raise and lower standard Automatic spout positioning optional |
Rotation, degrees | 210 degree (angle) |
Transmission
Type | Prodrive autoshift transmission Hydro-mechanical rear axle optional |
Vehicle
Transport length (without header) | 6.6 m 21.7 ft |
With rear tires | 620/60R30 |
Transport width (without header) | 3-3.7 m 9.84-12.1 ft |
With front tires | 710/70R42 |
Transport height (to cab roof) | 3.89 m 12.75 ft |
Working height (maximum) | Height to spout: 6.60 m 21.65 ft |