John Deere 360
  • + Expand All
  • - Close All
  • Heavy-duty hood and end plates
    Heavy-duty hood and end plates  Heavy-duty hood and end plates

    The hood and end plates are designed for heavy-duty applications:

    • Hood is made of 0.48-cm (0.188-in.) thick steel to resist denting and wear.
    • End plates are made of 0.64-cm (0.250-in.) thick steel to provide structural support and resistance to side thrusts.
    • Full-length torque tube helps prevent twisting when operating on uneven ground.
  • Tractor hookup
    3-point hitch on 360 Flail Mower 3-point hitch on 360 Flail Mower
    3-point hitch on 370 and 390 Flail Mowers 3-point hitch on 370 and 390 Flail Mowers

    All machines have a Category 2/1 3-point hitch. Bushings or reversible pins are included for Category 2/1 compatibility.

     

    The 360, 370, and 390 Mowers with centrally mounted hitches are suited for normal cutting conditions:

    • 360 Mower is compatible with quick-coupler Category 1 only.
    • 370 and 390 Mowers are compatible with quick-coupler Category 1 and 2.

    The 390 Mower with a 30.5-cm or 66-cm (12-in. or 26-in.) hitch offset to the right is ideal for trimming along walls, buildings, trees with low-lying branches, fences, or orchards.

  • Base equipment side-slicer knives or optional smooth-cut knives available
    Side-slicer knives Side-slicer knives

    Base equipment side-slicer knives are good all-purpose knives. They provide aggressive cutting action in tough conditions.

     

    The side-slicer knife characteristics are as follows:

    • Knives are made of heat-treated alloy steel for durability.
    • Individual knife weight, along with the centrifugal force created, provides an aggressive cutting action.
    • Edges are ground to provide a sharp cutting surface and reduced horsepower requirements.
    Rotor Rotor

    Smooth-cut knives can be ordered as an option:

    • Smooth-cut knives utilize the same mountings as the side-slicer knives.
    • These optional knives are good for grassy, weedy conditions and are self-cleaning.
    • Knives can also be resharpened for added wear life.
  • Heavy-duty gearbox and drive shaft
    Heavy-duty gearbox Heavy-duty gearbox
    PTO drive shaft PTO drive shaft

    All John Deere flail mowers feature this rugged, heavy-duty gearbox with a continuous 65-hp rating and an intermittent 90-hp rating. Another feature included is a five-year, unlimited-hour warranty.

3-Point Hitch

Quick-coupler compatible Yes (Category 1 only)