Specifications

Blades

Length Varies by deck size
Thickness 0.25 in.
0.64 cm
Number Three
Blade tip speed Approximately 18,000 fpm<br/>5,486 m/min

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake

Buyer's note

Warranty 36 months or 1200 hours, whichever comes first<br/>First 24 months, no hour limitation

Dimensions

Length 84 in.
213.4 cm
Width With chute down, 74, 86 in.
188, 218.4 cm
Height With ROPS up, 73 in.
185.4 cm
With ROPS down, 47 in.
119.4 cm
Weight 1,275 to1,365 lb
578 to 619 kg

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Filter Internal, replaceable
Transmission Hydrostatic
Travel speed Speed range<br/>0-10 mph<br/>0-16.1 km/h<br/>Forward<br/>0-10 mph<br/>0-16.1 km/h<br/>Reverse<br/>0-4.5 mph<br/>0-7.2 km/h<br/>

Electrical system

Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)

Engine

Displacement 50.3 cu in.
824 cc
Cylinders Two
Crankcase capacity With filter, 2.7 U.S. qt
2.6 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Power Gross t 3,600 rpm: 29 hp<br/>21.6 kW
Manufacturer/Model ECV860J EFI

Fuel system

Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.0-1.8 U.S. gal./hr
3.8-6.8 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes

Key Specs

Engine Power Gross at 3,600 rpm: 29 hp<br/>21.6 kW
Drive wheels 24x12-12
Blade tip speed Approximately 18,000 fpm<br/>5,486 m/min
Caster wheels 13x6.5-6
Fuel tank capacity 11.5 U.S. gal.<br/>43.5 L
Mower deck Size 60, 72 in.<br/>152, 183 cm
Warranty 36 months or 1200 hours, whichever comes first<br/>First 24 months, no hour limitation
Transmission Hydrostatic
Engine Manufacturer/model ECV860J EFI
Speed range 0-10 mph<br/>0-16.1 km/h

Mower decks

Deck construction 7Iron PRO, one-piece stamped steel with reinforcements
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side, MOD
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 60, 72 in.
152, 183 cm
Size 60, 72 in.<br/>152, 183 cm

PTO

Type Electro-magnetic, 225 lb-ft
305 Nm
Drive V-belt

Tires

Load rating 4 PR
Drive wheels 24x12-12

Wheels

Caster wheel type Flat free
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x6.5-6

Additional information

Date collected 23-May-2018