Key Features & Specs
- Standard four-wheel drive(4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- On-board diagnostics including Service Advisor
- Category 1 3-pt hitch compatible with dozens of implements
- Transmission Type Hydrostatic – 2 Range
- 2WD or 4WD 4WD
- 3PT Hitch Category 1
- Cab or Open Station Open Station
- PTO HP 30
- HP 37.3
Specifications
3-point hitch
Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
Type | Category 1 |
Dimensions
Wheelbase | 159.5 cm 62.8 in. |
Front axle clearance | 36.3 cm 14.3 in. |
Turning radius without brakes | 2.9 m 9.4 ft |
Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
Electrical
Battery size | 500 CCA |
Starter size | 1.4 kW 1.9 hp |
Alternator (12-V) | 55 amp |
Engine
Family | FYDXL1.57TDA EYDXL1.57TDA GYDXL1.57TDA |
Manufacturer | Yanmar |
Engine model | 3TNV86CT-NJT |
Engine power (gross) | 27.4 kW 36.7 hp |
Power take-off (PTO) power | 22.4 kW 30 hp |
Rated engine speed | 2500 rpm |
Type | Diesel |
Injection pump type | High pressure common rail direct injection |
Aspiration | Turbocharged |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.57 L 3 / 95.7 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 86 x 90 m 3.4 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water Pump |
Air cleaner | Dual element |
Engine torque at rated speed | 105 Nm 77.4 lb-ft |
Fuel tank capacity | 28.5 L 7.5 gal. |
Final drive
Type | Bull Gear |
Differential lock | Yes |
Fluid capacities
Crankcase with filter | 4.5 L 4.8 qt |
Transmission and hydraulic system | 21.0 L 5.5 U.S. gal. |
Fuel system
Type | High pressure common rail direct injection |
Fuel consumption | <br/> |
Hydraulics
Type | Open center |
Pump type | Dual gear |
Maximum operating pressure | 172.4 bar 2500 psi |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
Pump rated output | Steering<br/>15.0 L/min<br/>4.0 gpm<br/>Implement<br/>20.2 L/min<br/>5.3 gpm<br/>35.2 L/min<br/>9.3 gpm |
Key Specs
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Implement hydraulics | 20.2 L/min<br/>5.3 gpm |
Lift capacity, 24-in. behind link arms | 615.1 kg<br/>1356 lb |
Steering hydraulics | 15.0 L/min<br/>4.0 gpm |
Cruise control | Optional |
Engine power (gross) | 27.4 kW<br/>36.7 hp |
Hitch type | Category 1 |
Power take-off (PTO) power | 22.4 kW<br/>30 hp |
Wheelbase | 159.5 cm<br/>62.8 in. |
Approximate shipping weight (open-station; cab) | 1007.9 kg<br/>2222 lb |
Operator station
Platform - flat/straddle | Semi-flat |
Gear shift location - console/floor | Left-hand side |
Rollover protective structure | Type<br/>Foldable<br/>ASAE S478 |
Power take-off (PTO)
Standard | Rear - 540 rpm |
Control | Independent |
Clutch | Multi disc, wet |
Brake (for mid and rear PTO) | Multiple wet disc |
Tires
Front | Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 R4 - 27x8.5-15 |
Rear | Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 R4 - 43x16-20 |
Transmission
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Left-hand reverser | No |
Final drive | Bull Gear |
Brakes | Wet disc |
Steering | Power steering |
Cruise control | Optional |
Differential lock | Yes |
Axle capacity | Front<br/>798 kg<br/>1760 lb<br/>Rear<br/>1197 kg<br/>2640 lb<br/> |