3-point hitch

Lift capacity, 24-in. behind link arms 400 kg
882 lb
Type Limited Category 1


Wheelbase 1600 mm
63 in.
Front axle clearance 316 mm
12.5 in.
Turning radius without brakes 2.65 m
8.7 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) 813.5 kg
1793.4 lb


Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp


Family GYDXL1.27NS1
Manufacturer Yanmar
Engine model 3TNV80F-NCJT
Engine power (gross) 17.8 kW
23.9 hp
SAE J1995 rated power
Power take-off (PTO) power 13.4 kW
18 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.267 L
3 / 77 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 80 x 84 mm
3.2 x 3.3 in.
Compression ratio 23:01
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 53 Nm
39.09 lb-ft
Fuel tank capacity 23.8 L
6.3 gal.

Final drive

Type Spur Gear
Differential lock Yes

Fluid capacities

Crankcase with filter 2.7 L
2.9 qt

Fuel system

Type Indirect injection
Fuel consumption <br/>5.8 L/hr<br/>1.5 U.S. gal./hr


Type Open center
Pump type Gear
Maximum operating pressure 148.2 bar
2150 psi
Draft control sensing Position control
Remote control valves available Two
Pump rated output Steering<br/>13.25 L/min<br/>3.5 gpm<br/>Implement<br/>13.25 L/min<br/>3.5 gpm<br/>26.5 L/min<br/>7.0 gpm

Key Specs

Engine power (gross) 17.8 kW<br/>23.9 hp<br/>SAE J1995 rated power
Hitch type Limited Category 1
Standard transmission; forward/reverse Hydrostatic - 2 range
Approximate shipping weight (open-station; cab) 813.5 kg<br/>1793.4 lb
Cruise control Standard
Lift capacity, 24-in. behind link arms 400 kg<br/>882 lb
Power take-off (PTO) power 13.4 kW<br/>18 hp
Wheelbase 1600 mm<br/>63 in.
Implement hydraulics 13.25 L/min<br/>3.5 gpm
Steering hydraulics 13.25 L/min<br/>3.5 gpm


Toolbox Yes
Tilt steering wheel Yes
12-V Outlet Yes

Operator station

Rollover protective structure Type
Platform - flat/straddle Three-piece semi flat
Gear shift location - console/floor Left-hand side

Power take-off (PTO)

Standard Rear - 540 rpm
Mid - 2100 rpm
Control Independent
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc


Front R3 Turf - 23x8.50-12
R4 Industrial - 23x8.50-12
R3 Radial - 220/55-R12
Rear R3 Turf - 31x13.5-15
R4 Industrial - 12-16.5
R3 Radial - 280/70-R16
Front tread range 95.3 cm
37.5 in.


Standard transmission; forward/reverse Hydrostatic - 2 range
Left-hand reverser No
Final drive Spur Gear
Brakes Wet disc
Steering Power steering
Creeper No
Cruise control Standard
Differential lock Yes
Axle capacity Front<br/>612 kg<br/>1349 lb<br/>Rear<br/>1100 kg<br/>2425 lb<br/>