Blower/Crop accelerator

Number of blades 10


Cool box Optional
Electric adjust and heated Optional on rear view mirrors
Hectare counter Standard
Side window wiper Rear and side window wiper optional<br/>Parallel-type windscreen wiper
Operator's seat Air-suspension seat optional
Tilt and extend steering column Standard
Air conditioning and heater Standard - ClimaTrak
CAN-BUS electronics Standard
Rear view mirrors Standard
Trainee seat Standard
Operator information system Cornerpost display

Cooling system

Cooling fan drive Direct
Cooling system capacity 130 L<br/>34.34 U.S. gal.

Crop-harvesting units

Header height control Advanced header control (AHC) optional
Grass pick-ups 3.0, 4.0, 4.5 m<br/>9.8, 13.1, 14.8 ft


Speed at rated engine speed Standard - 1170 rpm<br/>Optional - 1350 rpm
Knife types available (crop) Straight - grass<br/>Curved - corn
Knife drum width 850 mm<br/>33.5 in.
Number of knives 40 - 48 - 56 - 64
Knife drum diameter 670 mm<br/>26.3 in.

Disk type (kernel processor)

Diameter of disks 240 mm<br/>9.45 in.


Belt tensioning Active, hydraulic pressure
Main driveband, polybelt belts Nine ribs
Main clutch Dry clutch
Number of discs Two discs
Main driveband Reinforced with Kevlar inserts
Crop harvesting unit Harvest channel wide
Hydraulics Load sensing
Ground drive Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake system<br/>Engine rpm on road: 1400-1800 rpm
Crop flow components Low-friction crop-flow concept

Electrical system/Electrical and hydraulic system

Type/voltage 12 / 24 V
Hydraulic system capacity 50 L<br/>13.2 U.S. gal.
Batteries/battery quantity/capacity 3 x 174 amp-hr
Alternator 12 V - 200 amp<br/>24 V - 140 amp


Fuel system Common rail plus four valves
Type Liebherr
Displacement 24.2 L<br/>1476.8 cu in.
Model D9512 A7 04
Cylinders V 12

Engine power

Fuel tank capacity 1500 L<br/>396.3 U.S. gal.
Maximum power at 1800 rpm 640 kW<br/>870 PS / 858 hp

Feeding system/Feedrolls

Width, front 830 mm<br/>32.7 in.
Feed roll frame opening Swing away, 37-45 degree (angle)
Standard feed roll drive Hydro feedroll drive IVLOC standard<br/>Infinitely header drive speed standard
Number Four
Metal detector Standard<br/>Stone detector is optional

Ground drive

Engine rpm - Management Optional
Automatic wet brake system Standard
Differential lock Manual and automatic
Maximum transport speed ProDrive transmission: 20 / 25 / 30 / 40 km/h
Rear axle type Hydro-mechanical 4WD

Kernel processor

Type John Deere Premium KP, John Deere XStream KP
Quick-change Quick kernel processor - swing in/swing out

Key Specs

Fuel system Common rail plus four valves
Fuel tank capacity 1,500 L<br/>396.3 U.S. gal.
Engine Type<br/>Liebherr<br/>Exhaust emission regulation compliancy: Tier 4 Final / Stage V<br/>Displacement<br/>24.2 L<br/>1476.8 cu in.<br/>Model<br/>D9512 A7 04<br/>Cylinders<br/>V 12<br/>
Maximum power at 1800 rpm 640 kW<br/>870 PS / 858 hp

Knife sharpening system

Reverse drive Standard
Reverse rotation Yes
Automatic from cab Yes, remote from cab

Length of cut

Range 40 knives: 7-25 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps / 1170 rpm<br/>48 knives: 6-21 mm (0.24-0.83 in.) LOC / 1 mm (0.04 in.) steps/ 1170 rpm<br/>56 knives: 4-18 mm (0.20 - 0.71 in.) LOC / 1 mm (0.04 in.) steps / 1170 rpm<br/>56 knives: 4-16 mm (0.16 - 0.63 in.) LOC / 1 mm (0.04 in.) steps / 1350 rpm<br/>64 knives: 3-14 mm (0.12 - 0.63 in.) LOC / 1 mm (0.04 in.) steps / 1350 rpm<br/>64 knives: 3-16 mm (0.12 - 0.71 in.) LOC / 1 mm (0.04 in.) steps / 1170 rpm

Machine management solutions

Documentation Harvest Doc™ optional
Length-of-cut control based on crop parameter Infinitely variable length-of-cut (IVLOC™) standard<br/>AutoLOC optional - use with HarvestLab
Satellite (GPS) assisted steering AutoTrac™ optional
Crop analysis HarvestLab™ optional
Yield monitoring Harvest Monitor™ optional


Engine oil and filter change duration 1000 hours
Rotary radiator screen cleaner Standard
Automatic lubrication system AutoLube optional

Propelling drive

Standard Prodrive autoshift transmission

Serrated roller (kernel processor)

Wholecrop, roll teeth number (speed differential) 178 - 32 or 40 percent (John Deere Premium KP)<br/>145 / 165 - 50 percent (John Deere XStream KP)
Maize, roll teeth number (speed differential) 118 - 32 or 40 percent (John Deere Premium KP)<br/>110 / 145 - 50 percent (John Deere XStream KP)
Sorghum, roll teeth number (speed differential) 238 - 32 (John Deere Premium KP) percent<br/>238 - 32 (John Deere XStream KP)


Hydraulic height position Hydraulic raise and lower standard<br/>Automatic spout positioning optional
Rotation, degrees 210 degree (angle)
Double-cap deflection Standard


Type Prodrive autoshift transmission<br/>Hydro-mechanical rear axle optional


Transport height (to cab roof) 3.89 m<br/>12.75 ft
Working height (maximum) Height to spout: 6.60 m<br/>21.65 ft
With rear tires 620/60R30
Transport length (without header) 6.6 m<br/>21.7 ft
With front tires 710/70R42
Transport width (without header) 3.1-3.7 m<br/>10.2-12.1 ft