Specifications

Blower/Crop accelerator

Number of blades 10
Rotor diameter/housing width Rotor diameter: 560 mm
22.86 in.
Housing width: 540 mm
21.26 in.
Speed (option) 1800 rpm

Cab

Tilt and extend steering column Standard
Air conditioning and heater Standard - ClimaTrak
Cool box Optional
Hectare counter Standard
CAN-BUS electronics Standard
Electric adjust and heated Optional on rear view mirrors
Rear view mirrors Standard
Side window wiper Rear and side window wiper optional
Parallel-type windscreen wiper
Operator information system Cornerpost display
Armrest display (Touchscreen)
Side rail display (Touchscreen) optional
Trainee seat Standard
Leather seat optional
Operator's seat Air-suspension seat optional
Leather seat optional

Cooling system

Cooling fan drive Direct
Cooling system capacity 82 L
21.66 U.S. gal.

Crop-harvesting units

Header height control Advanced header control (AHC) optional
Driveline Infinitely variable header drive
Optional dual header drive for grass pick-up
Header connection Multi-coupler for hydraulic and electric
Auto PTO coupler optional
Grass pick-ups (transport width) 3.0, 4.0, 4.5 m
9.8, 13.1, 14.8 ft
Standard or Premium Line

Cutterhead

Speed at rated engine speed 1100 rpm
Knife drum diameter 668 mm
26.3 in.
Knife drum width 680 mm
26.8 in.
Number of knives 40 - 48 - 56
Type Dura-Drum™ cutterhead
Shear bar, reversible Grass, corn, or Dura Line Plus
Shear bar adjust Fine shearbar adjust
Quick shearbar adjust
Knife types available (crop) Straight - grass
Curved - corn
Cutterhead housing width 686 mm
27 in.

Driveline

Hydraulics Load sensing
Crop harvesting unit Harvest channel standard
Crop flow components Low-friction crop-flow concept
Main clutch Dry clutch
Number of discs One disc
Main driveband Reinforced with Kevlar inserts
Belt tensioning Active, hydraulic pressure
Main driveband, polybelt belts Five ribs
Ground drive Standard: Hydrostatic, 3-speed - manual shift with helical gears
Engine rpm on road: 1650 rpm
Optional: Prodrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake system
Engine rpm on road: 1400-2100 rpm

Electrical system/Electrical and hydraulic system

Type/voltage 12 V
Batteries/battery quantity/capacity 1 x 174 amp-hr
Alternator 200 amp
Hydraulic system capacity 50 L
13.2 U.S. gal.

Engine

Manufacturer John Deere
Cylinders In line six
Fuel system Common rail plus four valves
Speed on road 1400-2100 rpm
Model Europe: 6090HZ029
North America: 6090HZ030
Displacement 9 L
549 cu in.
Type PowerTech™ PSS 9.0L
Exhaust emission regulation compliancy - Final Tier 4 / Stage V
Engine/ground speed management Optional

Engine power

Fuel tank capacity 1100 L
290.6 U.S. gal.
Rated power at 2100 rpm 251 kW
341 PS / 337 hp
DEF tank capacity ( for FT4 or EU Stage V emission level) 43 L
11.4 U.S. gal.
Maximum power at 1900 rpm 279 kW
380 PS / 375 hp

Feeding system/Feedrolls

Feed roll frame opening Swing away, 37-45 degree (angle)
Number Four
Width, front 660 mm
26 in.
Metal detector Standard
Stone detector is optional
Standard feed roll drive Hydro feedroll drive IVLOC standard
Infinitely header drive speed standard

Ground drive

Differential lock Manual or automatic (optional comes with ProDrive)
Rear axle type Hydro-mechanical 4WD
Automatic wet brake system Available with ProDrive transmission
Engine rpm - Management Optional
Maximum transport speed Hydrostatic transmission: 25 / 30 km/h
15.5 / 18.6 mph
ProDrive transmission: 20 / 25 / 30 / 40 km/h
12.4 / 15.5 / 18.6 / 24.9 mph
Type Standard: hydrostatic, 3-speed manual shift
Optional: Prodrive™, autoshift transmission

Header drive

Type Medium Duty Gearbox (i=3.0)
65cc/63cc (pump/motor displacement)

John Deere Premium KP

Lubrication Grease
Roll diameter 240 mm
9.45 in.
Available KP rolls Standard sawtooth
Duraline sawtooth
Whole crop
Weight 320 kg
145 lb
Wholecrop, roll teeth number (speed differential) 178 (32 / 40 percent)
Speed differential / Roll speed (lower) 32 percent
Optional 40 percent
Sorghum, roll teeth number (speed differential) 238 (32 percent)
Maize, roll teeth number (speed differential) 118 (32 / 40 percent)
Housing Standard KP housing

John Deere XStream KP

Housing Heavy duty housing with KP roll quick exchange system
Lubrication Pressurized oil

Kernel processor

Quick-change Quick kernel processor - swing in/swing out
Type Premium KP (8100-8600)
XStream KP (8300-8600)
Quick KP removal Optional: Crane with remote-controlled electric hoist

Key Specs

DEF tank capacity ( for FT4 or EU Stage V emission level) 43 L
11.4 U.S. gal.
Fuel system Common rail plus four valves
Fuel tank capacity 1,100 L
290.6 U.S. gal.
Engine Type
PowerTech™ PSS 9.0L
Exhaust emission regulation compliancy - Final Tier 4 / Stage V
Displacement
9 L
549 cu in.
Model
Europe: 6090HZ029
North America: 6090HZ030
Cylinders
Inline 6

Knife sharpening system

Reverse rotation Yes
Automatic from cab Yes, remote from cab
Reverse drive Standard
Sharpening modes Grinding and finishing

Length of cut

Range 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm
48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm
56 knives: 5-19 mm (0.20-0.75 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm
56 knives: 4-17 mm (0.16 - 0.67 in.) LOC / 1 mm (0.04 in.) steps / 1200 rpm

Machine management solutions

Length-of-cut control based on crop parameter Infinitely variable length-of-cut (IVLOC™) standard
AutoLOC™ optional with HarvestLab 3000
Crop analysis HarvestLab™ 3000 optional
Satellite (GPS) assisted steering AutoTrac or Manual RowSense optional
Yield monitoring Harvest Monitor™ optional
Documentation Harvest Doc™ optional

Maintenance

Rotary radiator screen cleaner Standard
Automatic lubrication system Optional
Engine oil and filter change duration JD+50™ II oil: 500 hours
Other oil: 250 hours

Propelling drive

Standard Hydrostatic, 3-speed - manual shift with helical gears

Spout

Rotation, degrees 210 degree (angle)
Double-cap deflection Standard
Hydraulic height position Hydraulic raise and lower standard
Automatic spout positioning optional
Reach from center line (Optional) 6 or 8 row: 4.73 m
15.5 ft
10 row: 5.87 m
19.3 ft
12 row: 6.71 m
22 ft

Transmission

Type Standard: Hydrostatic, 3-speed - manual shift with helical gears
Hydro-mechanical 4WD rear axle optional

Vehicle

With front tires 710/70R42
With rear tires 620/60R30
Transport width (without header) 3-3.5 m
9.84-11.5 ft
Transport length (without header) 6.5 m
21.4 ft
Transport height (to cab roof) 3.89 m
12.75 ft
Working height (maximum) Height to spout: 6.60 m
21.65 ft