John Deere LW12 Series
  • + Expand All
  • - Close All
  • Adjustable tongue (hitch) folds out of way for easy repositioning of unit
    Adjustable tongue (hitch) Adjustable tongue (hitch)
    #

    The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.


    The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.

  • Remote steering and shutdown conversion kits for LW11 and LW12 Bale Wrappers

    Remote steering and shutdown conversion kits allow the operator to steer and start/stop the wrapper from the operator station of the tractor or from the skid steer that is loading the bales into the wrapper.

  • Traction implement tires great on wet and uneven terrain
    Assist in difficult field conditions Assist in difficult field conditions
    #

    Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.


    The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.

  • Light kit for bale wrapper

    A conversion kit provides night working lights on LW1166 and LW1266 In-Line Bale Wrappers.

  • Film wrap sensor shuts down wrapping cycle when out of film
    Sensor comprised of silver rod and limit switch Sensor comprised of silver rod and limit switch
    #

    The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.

  • Control box and levers are control center of machine
    Multipurpose control center Multipurpose control center
    #

    The control box and levers are the control center of the in-line bale wrappers. 

     

    Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push. 

  • Quick-start power jack for LW1266 Bale Wrappers

    The quick-start power jack conversion kit lifts the bale wrapper to level the roller bed when starting a new bale line on the LW1266 In-Line Bale Wrappers.

  • Options available to increase productivity and uptime
    14.9-kW (20-hp) Honda® engine

    A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.

    NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.

    Single- and dual-power drive
    Optional single-power drive Optional single-power drive

    Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.

    Steering remote control
    Remotely stops and starts the unit Remotely stops and starts the unit

    This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.

    Twin wrap kit
    Twin wrap kit Twin wrap kit

    This kit provides a double layer of wrap, increasing the amount of wrap applied to bales.

    Work lights
    Lights allow operators to work longer hours Lights allow operators to work longer hours

    For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.

    Guide rollers
    Optional guide rollers Optional guide rollers

    Optional guide rollers help keep the bales on the bale ramp in uneven terrain.

    Power jack
    Power jack Power jack

    The optional power jack hydraulically raises the bale ramp to a level position to eliminate air pockets between bales when starting a row. The bale ramp is lowered after three bales have been wrapped.

    Bale Follower

    The bale follower allows the in-line wrapper to automatically follow the line of bales next to it.

     

    Honda is a trademark of Honda Motor Co., Ltd.

  • Guide rollers conversion kit for LW12 Series Bale Wrappers

    This sidehill guide rollers conversion kit prevents bales from sliding off of the rollers when wrapping on hillsides.

Bale capacity

Square bale size 0.9x0.9x.1.7 m
3x3x5.5 ft
Round bale diameter 1.7 m
5.5 ft