John Deere LW11 Series
  • + Expand All
  • - Close All
  • Adjustable tongue (hitch) folds out of way for easy repositioning of unit
    Adjustable tongue (hitch) Adjustable tongue (hitch)
    #

    The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.


    The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.

  • Film wrap sensor shuts down wrapping cycle when out of film
    Sensor comprised of silver rod and limit switch Sensor comprised of silver rod and limit switch
    #

    The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.

  • Remote steering and shutdown conversion kits for LW11 and LW12 Bale Wrappers

    Remote steering and shutdown conversion kits allow the operator to steer and start/stop the wrapper from the operator station of the tractor or from the skid steer that is loading the bales into the wrapper.

  • Wheel conversion kits for LW11 and LW12 Bale Wrappers

    The first kit listed is a dual-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. Dual drive improves traction in wet and slick conditions.

     

    The second kit listed is a single-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. One rear tire is hydraulically driven.

  • Traction implement tires great on wet and uneven terrain
    Assist in difficult field conditions Assist in difficult field conditions
    #

    Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.


    The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.

  • Light kit for bale wrapper

    A conversion kit provides night working lights on LW1166 and LW1266 In-Line Bale Wrappers.

  • Options available to increase productivity and uptime
    14.9-kW (20-hp) Honda® engine

    A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.

    NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.

    Single- and dual-power drive
    Optional single-power drive Optional single-power drive

    Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.

    Steering remote control
    Remotely stops and starts the unit Remotely stops and starts the unit

    This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.

    Twin wrap kit
    Twin wrap kit Twin wrap kit

    This kit provides a double layer of wrap, increasing the amount of wrap applied to the bales.

    Bale follower

    The bale follower allows the in-line wrapper to automatically follow the line of bales next to it.

    Work lights
    Lights allow operators to work longer hours Lights allow operators to work longer hours

    For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.

     

    Honda is a trademark of Honda Motor Co., Ltd.

  • Control box and levers are control center of machine
    Multipurpose control center Multipurpose control center
    #

    The control box and levers are the control center of the in-line bale wrappers. 

     

    Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push. 

  • Bale push is integrated into machine
    Optional bale push-off arm Optional bale push-off arm
    Operator needs to extend arm Operator needs to extend arm

    The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push-off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.

Bale capacity

Round bale diameter 1.7 m
5.5 ft