John Deere 22B

22B Integral Ripper

  • John Deere
  • Rippers

Find a location to get your local store information and inventory.

Find Location
Your Preferred Store
Change location Change location
Request Quote
Key Features & Specs
  • Regular and capped ripper points
  • LaserRip™ Extreme points
  • Mole ball is used to make a tunnel drainage system
  • Heavy-duty knife
  • Working Speed 5 mph (8 km/h)
  • Residue Management fracture
  • Residue Conditions light/medium/heavy
  • Working Depth up to 22 in (559 mm)
  • Required HP (PTO)/FT 45 to 140 (33.57-104.4 kW)
  • Depth Control 3pt hitch
  • + Expand All
  • - Close All
  • Economical single parabolic standard ripper promotes root growth

    A single parabolic standard ripper provides an economical means of shattering hardpan soil by exploding the soil upward to promote root growth:

    • Curved standard is less likely to slice through marginally moist soils than a straight standard
    • Mole ball can be attached to the standard to help drain wet soils by leaving a small tunnel under the soil
    • V-knife can be attached to the standard to effectively cut the root systems
    • Improves water percolation into the subsoil zone

    Two sizes of standards are available:

    • 25 mm x 686 mm (1 in. x 27 in.)
      • Maximum working depth of 406 mm (16 in.)
    • 32 mm x 838 mm (1.25 in. x 33 in.)
      • Maximum working depth of 559 mm (22 in.)

    Both standards are protected for up to 6364 kg (14,000 lb) of operating force by a 16-mm (5/8-in.) shear bolt.

  • Attaches to 3-point hitch

    The 22B In-Line Ripper attaches to the tractor's 3-point hitch:

    • 25-mm x 686-mm (1-in. x 27-in.) standard model is compatible with Category 1, 3-point hitch tractors.
    • 32 mm x 838 mm (1.25 in. x 33-in.) standard model is compatible with Category 2 or 2/3N tractors with or without Quik-Coupler
      • 16.9-30 or larger rear tractor tires are recommended

Coulters

Blades High-carbon steel: 76x10 mm
3x0.375 in.
Long: 610 mm
24 in.