Auxiliary top auger

Type Optional, hydraulic drive


Type Straight line knife drive system
Length 10.8 m
35.5 ft
Knife drive Dual knife base
Knife speed 490 cycles/min
Cutterbar tilt Base hydraulic, 9 degrees tilt maximum


Platform length 11.6 m
37.9 ft
Overall operating depth 2.5 m
8.2 ft
Transport width, field position 11.4 m
37.5 ft
Transport width on wheel, less dividers 2.7 m
8.9 ft
Transport length, hitch extended 13.8 m
45.4 ft

Draper belts

Width Side belts 1,016 mm
40 in.
Center belts 1,397 mm
55 in.
Center belt not included with SPW configuration
Clean height Cleats 25.4 mm
1 in.
Operating speed Side belts; variable up to 223 m/min
735 fpm
Center belts 212 m/min
695 fpm
Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration

Feed drum

Diameter 406 mm
16 in.
Feed drum not included with SPW configuration
Feed drum fingers Heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed 195 rpm
Center clean out door Base

Header height sensing

Type Electro-hydraulic, base
Header height sensing on the ground Base
Header height sensing off the ground Base

Pickup reel

Number of slats 6 bat poly base
Fingers Nylon
Diameter 1,067 mm
42 in.
Height control Hydraulic
Speed control Hydraulic
Reel lift Cylinder stroke 330 mm
13 in.
Total range 391.5 mm
15.4 in.
Reel fore and aft Cylinder stroke 359 mm
14.1 in.
Total range 620 mm
24.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm


Approximate weight (pickup reel) Combine only 3,514 kg
7,746 lb
SPW only 2,914 kg
6,423 lb
Approximate weight (with transport) Combine only 3,690 kg
8,136 lb
SPW only 3,091 kg
6,813 lb