Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Cab

Compliance OSHA, SAE, ASAE
Visibility 360 degree (angle)
Noise rating 78 dBA
Seat equipment Air suspension with swivel
Doors Two
Air conditioning, temperature differential 14.4 °C
58 °F

Dimensions

Turning radius with brakes 2.8 m
9.17 ft
Turning radius without brakes 3.0 m
9.84 ft
Wheelbase 185.5 cm
73 in.
Approximate shipping weight (open-station; cab) OOS - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb
Front axle clearance 35.1 cm
13.8 in.

Electrical

Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp

Engine

Manufacturer Yanmar
Engine model 4TNV88C-MJT
Rated engine speed 2600 rpm
Type Diesel
Aspiration Natural
Emissions compliance Final Tier 4
Number of cylinders Four
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element with electronic restriction indicator
Injection pump type High pressure common rail direct injection
Bore and stroke 88x90 mm
3.46x3.54 in.
Family EYDXL2.19NDA
FYDXL2.19NDA
GYDXL2.19NDA
Engine torque at rated speed 116 Nm
85.6 lb-ft
Cylinders/displacement 4 / 2.189 L
4 / 133.5 cu in.
Fuel tank capacity Rollover protective structure (ROPS) - 56.9 L
15 U.S. gal.
Cab - 52.2 L
13.8 U.S. gal.
Power take-off (PTO) power PowrReverser transmission: 25 kW
33.6 hp
eHydro transmission: 24.1 kW
32.3 hp
Engine power (gross) SAE J1995 rated power: 31.7 kW
42.5 hp
43.1 PS at 2600 rpm

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Crankcase with filter 5.3 L
1.4 qt
Transmission and hydraulic system 47.3 L
12.5 gal.

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Draft control sensing Position control
Remote control valves available Up to six rear remotes
Pump type Single gear
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
65.8 L/min
17.4 gpm

Key Specs

Hitch type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Cruise control Standard
Approximate shipping weight (open-station; cab) OOS - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb
Wheelbase 185.5 cm
73 in.
Standard transmission; forward/reverse eHydro Transmission (eHST)
Steering hydraulics 23.5 L/min
6.2 gpm
Power take-off (PTO) power PowrReverser™ transmission: 25 kW
33.6 hp
eHydro™ transmission: 24.1 kW
32.3 hp
Per SAE J1995
Implement hydraulics 42.3 L/min
11.2 gpm
Engine power (gross) SAE J1995 rated power: 31.7 kW
42.5 hp
43.1 PS at 2600 rpm

Operator station

Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Position
Clutch Wet disc
Optional 540E rpm
Standard Independent
540 rpm at 2600 rpm

Tires

Rear Farm - 13.6-28
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24
Rear tread spacing 137.2 cm
54 in.
Front Farm - 8-16
Turf - 27x10.5-15 or 27x12LL-15
Industrial - 10-16.5
Front tread range 148.1 cm
58.3 in.

Transmission

Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Cruise control Standard
Differential lock Yes
Standard transmission; forward/reverse eHydro transmission (eHST)
Optional transmission; forward/reverse 12/12 PowrReverser transmission (PRT)
Left-hand reverser PRT only
Creeper SpeedMatch standard
Transmission gear ranges PRT - 12F/12R
eHydro - Infinitely-variable, 3 range
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Clutch disk diameter wet clutch 129 mm
5.08 in.