Specifications

Key Specs

Horsepower requirement 24.5-34.25 engine kW/m (10-14 engine hp/ft)
Operating speed 12.9-16.1 km/h
8-10 mph
Up to 12.9 km/h (8 mph) in rocky conditions
Blade spacing 18.4 cm
7.25 in.
Transport width Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.)
Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.)
Transport height Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.)
Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.)

Machine

Horsepower requirement 24.5-34.25 engine kW/m (10-14 engine hp/ft)
Rolling basket Double Rolling basket, Reverse Knife edge, followed by round bar or flat bar rolling basket
Gang angle 0-12 degrees
Working width Gang angle at 0 degrees
Three-section: 6.25 m (20 ft, 6 in.), 7.75 m (25 ft, 5 in.), 9.2 m (30 ft, 3 in.), and 10.3 m (33 ft, 10 in.)
Five-section: 13.26 m (43 ft, 6 in.) and 15.1 m (49 ft, 6 in.)
Weight per blade 117.9 kg
260 lb
Transport width Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.)
Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.)
Blade spacing 18.4 cm
7.25 in.
Depth control Single point and TruSet™ system
Operating speed 12.9-16.1 km/h
8-10 mph
Transport length Without rear hitch
Three-section: 10.06 m
33 ft
Five-section: 12.19 m
40 ft
Blade thickness 6.5 mm
0.256 in.
Maximum operating depth 10.16 cm
4 in.
*Maximum depth may be shallower depending on ground conditions and tire package.
Underframe clearance 3.66 m
12 ft
Transport height Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.)
Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.)
Blade diameter 55.9 cm
22 in.