Specifications

Blower/Crop accelerator

Speed (option) 1800 rpm
Number of blades 10
Rotor diameter/housing width Rotor diameter: 560 mm
22.86 in.
Housing width: 540 mm
21.26 in.

Cab

Air conditioning and heater Standard - ClimaTrak
Hectare counter Standard
Cool box Optional
Tilt and extend steering column Standard
Electric adjust and heated Optional on rear view mirrors
Operator's seat Air-suspension seat optional
Leather seat optional
CAN bus electronics Standard
Operator information system Cornerpost display
Armrest display (Touchscreen)
Side rail display (Touchscreen) optional
Rearview mirrors Standard
Side window wiper Rear and side window wiper optional
Parallel-type windscreen wiper
Trainee seat Standard
Leather seat optional

Cooling system

Cooling fan drive Direct
Cooling system capacity 113 L
29.85 U.S. gal.

Cutterhead

Number of knives 40 - 48 - 56 - 64
Shear bar, reversible Grass, corn, or Dura Line Plus
Knife types available (crop) Straight - grass
Curved - corn
Shear bar adjust Fine shearbar adjust
Quick shearbar adjust
Speed at rated engine speed Standard - 1100 rpm
Optional - 1200 rpm
Knife drum width 680 mm
26.8 in.
Knife drum diameter 670 mm
26.3 in.
Cutterhead housing width 686 mm
27 in.
Type Dura-Drum™ cutterhead

Driveline

Main driveband, polybelt belts Six ribs
Crop flow components Low-friction crop-flow concept
Main driveband Reinforced with Kevlar inserts
Number of discs One disc
Belt tensioning Active, hydraulic pressure
Hydraulics Load sensing
Main clutch Dry clutch
Crop harvesting unit Harvest channel standard
Ground drive Standard: Hydrostatic, 3-speed - manual shift with helical gears
Engine rpm on road: 1650 rpm
Optional: ProDrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake system
Engine rpm on road: 1400-2100 rpm

Electrical system/Electrical and hydraulic system

Type/voltage 13 V
Alternator 201 amp
Batteries/battery quantity/capacity 2 x 174 amp-hr
Hydraulic system capacity 50 L
13.2 U.S. gal.

Engine

Engine/ground speed management Optional
Fuel system Unit injector plus four valves
Cylinders In line six
Speed on road 1400-2100 rpm
Manufacturer John Deere
Type PowerTech™ PSS 13.5 L
Exhaust emission regulation compliancy - Final Tier 4 / Stage V
Displacement 13.5 L
823.8 cu in.
Model Europe: 6135HZ021
North America: 6135HZ022

Engine power

DEF tank capacity ( for FT4 or EU Stage V emission level) 43 L
11.4 U.S. gal.
Maximum power 371 kW
505 PS/ 498 hp
Fuel tank capacity 1100 L
290.6 U.S. gal.

Feeding system/Feedrolls

Number Four
Feed roll frame opening Swing away, 37-45 degree (angle)
Standard feedroll drive Hydro feedroll drive IVLOC standard
Infinitely header drive speed standard
Metal detector Standard
Stone detector is optional
Width, front 660 mm
26 in.

Ground drive

Automatic wet brake system Available with ProDrive transmission
Differential lock Manual or automatic (optional comes with ProDrive)
Rear axle type Hydro-mechanical 4WD
Engine speed management Optional
Maximum transport speed Hydrostatic transmission: 25 / 30 km/h
15.5 / 18.6 mph
ProDrive transmission: 20 / 25 / 30 / 40 km/h
12.4 / 15.5 / 18.6 / 24.9 mph
Type Standard: hydrostatic, 3-speed manual shift
Optional: ProDrive, autoshift transmission

John Deere Premium KP

Sorghum, roll teeth number (speed differential) 238 (32 percent)
Lubrication Grease
Housing Standard KP housing
Available KP rolls Standard sawtooth
Duraline sawtooth
Whole crop
Roll diameter 240 mm
9.45 in.
Weight 320 kg
145 lb
Speed differential / Roll speed (lower) 32 percent
Optional 40 percent

John Deere XStream KP

Bearing temperature monitoring system Optional
Speed differential / Roll speed (lower) 50 percent
Lubrication Pressurized oil
Sorghum, roll teeth number (speed differential) 238 (32 percent)
Housing Heavy duty housing with KP roll quick exchange system
Available KP rolls Duraline sawtooth
Duraline XCut
Whole crop XCut
Roll diameter 250 mm
9.84 in.

Kernel processor

Quick-change Quick kernel processor - swing in/swing out
Quick KP removal Optional: Crane with remote-controlled electric hoist
Type Premium KP (8100-8600)
XStream KP (8300-8600)

Key Specs

Fuel system Unit injector plus four valves
DEF tank capacity ( for FT4 or EU Stage V emission level) 43 L
11.4 U.S. gal.
Engine Type
PowerTech™ PSS 13.5L
Exhaust emission regulation compliancy - Final Tier 4 / Stage V
Displacement
13.5 L
823.8 cu in.
Model
Europe: 6135HZ021
North America: 6135HZ022
Cylinders
Inline 6
Maximum power 371 kW
505 PS/ 498 hp
Fuel tank capacity 1,100 L
290.6 U.S. gal.

Knife sharpening system

Sharpening modes Grinding and finishing
Automatic from cab Yes, remote from cab
Reverse rotation Yes
Reverse drive Standard

Length of cut

Range Range at 1100 rpm
40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps
48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps
56 knives: 5-19 mm (0.20-0.75 in.) LOC / 1 mm (0.04 in.) steps
Range at 1200 rpm
56 knives: 4-17 mm (0.16-0.67 in.) LOC / 1 mm (0.04 in.) steps
64 knives: 3-15 mm (0.12-0.59 in.) LOC / 1 mm (0.04 in.) steps

Machine management solutions

Assisted steering systems AutoTrac or Manual RowSense optional
Yield monitoring Harvest Monitor™ optional
Crop analysis HarvestLab™ 3000 optional
Documentation Harvest Doc™ optional
Length-of-cut control based on crop parameter Infinitely variable length-of-cut (IVLOC™) standard
AutoLOC™ optional with HarvestLab 3000

Maintenance

Rotary radiator screen cleaner Standard
Automatic lubrication system AutoLube optional
Engine oil and filter change duration Plus-50™ II oil: 500 hours
Other oil: 250 hours

Propelling drive

Standard Hydrostatic, 3-speed - manual shift with helical gears

Spout

Double-cap deflection Standard
Rotation, degrees 210 degree (angle)
Hydraulic height position Hydraulic raise and lower standard
Automatic spout positioning optional

Transmission

Type Standard: Hydrostatic, 3-speed - manual shift with helical gears
Hydro-mechanical rear axle optional

Vehicle

With front tires 710/70R42
With rear tires 620/60R30
Transport width (without header) 3-3.5 m
9.84-11.5 ft
Transport height (to cab roof) 3.89 m
12.75 ft
Working height (maximum) Height to spout: 6.60 m
21.65 ft
Transport length (without header) 6.5 m
21.4 ft